You have 0 items in your cart.
Process Analyzers
Sub Categories
Category:
Panel Mount pH/ORP Analyaer
Compact DIN 96 size design Auto-detection of electrode deterioration Automated self-diagnosis of fault (burn-out output) Alterable alarm contact signal (4-point) 2-channel output (RS-232 optional) Meas. range: HBM-100A: pH； -1 - 15 HBM-102A: ORP； -2000 - +2000 mV
Category:
Exchangeable Tip pH Electrode
Easy-to-replace electrode tip and reference electrode junction tip Alkali-resistant glass tips and hydrofluoric-acid-resistant glass tips available KCl non-refillable type for wastewater treatment; KCl refillable type for processes Selection of electrode holder: immersion type, drop-in type and flow-through type Meas. range pH： 0 - 14
Category:
Exchangeable Tip pH Electrode
Exchangeable Tip ORP Electrode PSS/ASS‐304B（KCl replenish-free） / PSS/ASS‐314B（KCl refillable） asy-to-replace electrode tip and reference electrode junction tip Platinum electrodes (PSS) and gold electrodes (ASS) available KCl non-refillable type is ideal for wastewater treatment; KCl refillable type for processes Selection of electrode holder: immersion type, drop-in type and flow-through type Meas. range ORP： -2000 - +2000 mV
Category:
Immersion Type pH/ORP Detector
Ideal for pH/ORP measurements in tanks and open water applications Assemble electrodes available: 5600 (KCl refillable type); 5910 (KCl replenish-free type) Mounting flanges for tanks available (50A, 100A, 150A)
Category:
Flow-Through Type pH/ORP Detector
Designed for pH/ORP measurements in closed loop lines and environments where process pressure exists, such as pipes or sealed tanks and etc. Assemble electrodes available: 5610(KCl refillable type); 5910(KCl replenish-free type)
Category:
pH Sensor for Pure Water Measurement
Ideal for pure water measurements like boiler water (low electric conductivity) Low flow injection of sampling allows for accurate measurement Assemble electrodes available: MG-511-2F (glass electrode) 4164-2F (reference electrode) 6149-2F (temperature compensation electrode)
Electrode Holder with Lift Up Type Jet Cleaner LHC-7D A detector which can lift up from the sample water and remove fouling from the pH/ORP electrode effectively. Automatic cleaning system that applies alternate streams of wash water and chemical solution (such as a 5% hydrochloric acid solution) to clean the pH/ORP detector.
Flow-Through Type Detector with Ultrasonic Cleaner UHC-7C / UHC-8C Detectors composed of holder and ultrasonic cleaner: Immersion type (UHC-7C) and flow-through type (UHC-8C) One-touch detachable holder enables quick calibration and easy maintenance Compatible with GSS series