Sub Categories
Automated Total Nitrogen/Phosphorus/COD Analyzer NPW-160 Measuring based on official measuring method Multiple-wavelength detector enables measurement of total nitrogen, total phosphorus and COD simultaneously Space-saving design attained by eliminating back piping Drip-proof construction Meas. range Total nitrogen: 0 - 2 mg/L to 50 mg/L Total phosphorus: 0 - 0.5mg/L to 20 mg/L COD (UV method): 0 - 2 Abs
PM2.5 Monitor FPM-377 Environment Ministry (JAPAN) Approval Beta ray attenuation method (mass concentration) Heater type dehumidifier VSC cyclone (USEPA approval) Outdoor type and indoor type available Meas. range 0 - 500, 0 - 1000, 0 - 5000 μg/m3
MadgeTechs Vaccine Temperature Monitoring System (VTMS) is ideal for the continuous measurement and data logging of temperature sensitive vaccines or pharmaceuticals in refrigerators, freezers, and coolers. The system includes a NIST traceable RFTCTemp2000A data logger with thermocouple, Glycol bottle and a power supply. Additionally, the RFTCTemp2000A data logger in the VTMS system has a convenient LCD to ensure temperature parameters are met, in real time. The current reading, minimum, maximum and average statistics can all be obtained through the display. In the real-time chart recording mode the VTMS can alert the user, or other personnel, via e-mail or text message if the refrigerator has failed, or if the temperature is outside of the nominal range. This allows users to take immediate actions to ensure vaccines and pharmaceuticals in storage are not destroyed. To prevent false alarms, the RFTCTemp2000A is connected to a Glycol bottle which provides temperature buffered readings.
Current Range: 1 to 600 A DC or AC Peak Basic Accuracy (DC to 400 Hz): +/- (2% of reading + 1 A) Output Signal: 100 A range: 10 mV/A | 600 A range: 1 mV/A Frequency Range: 40 Hz to 400 Hz Working Voltage: 600 V AC rms Maximum Conductor Diameter: 34 mm (1.34 inch) Safety Rating: IEC 1010 and CSA-C22.2 No. 1010-1 Installation Category II, Working Voltage 600V
Qualifies - Sees if your existing cabling has the bandwidth to support voice, 10/100, VoIP or Gigabit Ethernet Troubleshoots - shows why existing cabling cannot support the network's bandwidth requirement (e.g. crosstalk at 11 meters) Discovers - detects what's at the end of any cable and displays device configuration (speed/duplex/pairing) Identifies unused switch ports that can be reallocated Graphically maps wiring configuration and shows distance to faults with Intelligent Wiremap Tests all copper cabling media: twisted-pair, coax, and audio cabling
NetProve diagnostics – isolate device and application connectivity issues in seconds Inline Gigabit vision - quickly troubleshoot network problems with powerful inline vision into 10/100/Gig traffic between switches, PCs, IP phones and other devices NetSecure monitoring and authentication - identify spyware, malware, and viruses with port monitoring; troubleshoot authentication issues with 802.1x log VoIP troubleshooting - connect inline for visibility into VoIP calls to quickly diagnose IP phone boot-up and call control problems and to measure key call quality metrics PoE Measurements - verify readiness of PoE systems and troubleshoot PoE device problems Spot available network resources – See MAC and IP addresses, subnet and services offered by active servers, routers and printers IntelliTone digital signaling - quickly and safely locate cables on active network