Others

  • Filter

This panel demonstrates the operation of all Kyoritsu AC, AC/DC and Leakage clamp meters including the special open jaw AC/DC clamp meters like KEW FORK 2300R or KEW MATE 2000 series. It features the "actual size" photos of 3 different instruments. However for an effective demonstration, real samples of these instruments should be attached to the panel using a simple anti-theft cable supplied with the panel. This panel generates approx: 15A AC and DC, 30 mA AC of leakage current, 12V AC, 15V DC and 10Ω. The current values can be measured by simply clamping the wires or, for voltage and resistance values, touching the metallic test points on the panel with the instrument test leads.

This panel demonstrates the use of Kyoritsu Leakage Clamp Meters in troubleshooting nuisance tripping of RCD's due to leakage currents. It includes an RCD with bypass facilities and 5 downstream circuits. Each circuit can simulate a fixed/variable leakage current by selecting an appropriate switch. Using a Kyoritsu Leakage Clamp the overall leakage current can be found and the source of leakage current direction can be traced by clamping the conductors in each circuit. There can also be a combination of one or more leakage currents, for instance, it is possible to simulate a situation of an RCD tripping due to two faulty circuits, one with a fixed leakage current and the other one with variable leakage current (for example due to humidity).

This demonstrative panel is intended to demonstrate the use Multifunction testers and specific instruments like Continuity, Insulation, Earth, Loop and RCD testers of Kyoritsu. The panel simulates an electrical installation with TT and TN distribution systems, easy selectable by a switch on the panel. The tests that can be carried out are: • Continuity Test of Protective and Equipotential conductors • Insulation Resistance Test • Earth Resistance Test (Volt-Ampere method) • Earth Loop Test, including Prospective Short circuit Current (PSC) and Prospective Fault Current (PFC) • RCD Tripping Test

Phase Indicator with open phase checker • Phase indicator designed to check the presence of open phase and also the phase sequence by rotating disk and lamps. • Can check a wide range of 3-phase power source from 110V to 600V.

Digital Phase Indicator with open phase checker • Phase indicator designed to check the presence of open phase and also the phase sequence by LED and buzzer at the same time. • Small, lightweight, and portable.

KEW8031F is designed to check phase sequence.Lamps provided on the unit will also tell you if a phase is open. • Can check a wide range of 3-phase power source from 110V to 600V.Sealed against dust, the unit ensures trouble-free performance. • Small, Lightweight and portable.Designed for maximum ease of operation and ruggedness. • No exposed metal parts, Safety features are incorporated including the instant push button switch operation.

New technology permits safe testing, without the need of direct contact between probes and live wires. • The insulated crocodile clips can clip insulated cables from φ2.4 to 30mm. • Phase rotation is indicated by the rotary illumination of LEDs and logical audible tones. • The instrument can be fixed to a metal panel via the magnet on the back side. • Wide measuring range for 3 phase installations from 70V to 1000V AC. • Super brightness function permits clear LED's indication also in sunshine. • Complies with IEC 61010-1 CAT.IV 600V and CAT.III 1000V.

Waterproof handheld Infrared Thermometer • Safe even if getting wet. Dustproof and waterproof structure of IP67. • Possible to wash • Please feel secure to use the product on the spot, made from ABS resin of antibacterial specification. • Shock-proof structure: No damage even if dropped from the height of 1m. • With auto-power-off function, preventing consumption of the battery • Wide Temperature Range of -40ºC to 300ºC • Small and light: Possible to measure easily by one hand. • Portable type: Convenient to carry