You have 0 items in your cart.
Category:
Temperature Sticks/Thermometer Sticks
" Instrument Range: -50 to +300°C" NSF® approved" 5 second response" 240mm stem with 2.5 mm reduced tip" Waterproof" Shatterproof" For thin cuts of meat, fish or poultry" Data-hold,Big digit*Made in Korea
Category:
Portable Appliance Testers
The KEW 6201A is a portable appliance tester, performing four functions to ensure the Safety of ClassI and ClassII appliances. And also can measure the mains voltage. Readings are displayed on a large liquid crystal display (LCD) below which are four LEDs which unambiguously display a pass or fail indication for threshold values dictated by AS/NZS 3760.
Category:
FLIR B335
690V AC / DC Proving Unit 50-690 V proving unit with just two terminals to test AC and DC voltage detectors Essential for proving that circuits are not live when working on electrical circuits. Kewtech Part No: KEWPROVE3
Category:
Power Meter
Comprehensive real-time monitoring, recording and analysis of single and 3-phase systems • Voltage, Current, Power Factor and Frequency measurements • Power analysis (Active, Apparent and Reactive power) • Energy analysis (Active, Apparent and Reactive power) • Active power accuracy: ±0.3%rdg±0.2%f.s. • Automatic wiring check function to prevent incorrect connections • Large memory capability (2GB) using built-in SD card interface • Real time & remote measurements using Android application • synchronous measurements between two units of KEW 6305 • Wide selection of clamp sensors allow measurements from 0.1A to 3000A • The instrument automatically recognizes what kind of clamp sensor is connected to it
Category:
Sensors, Multi-Trans, Clamp adaptors
Permits extension of the AC and DC current ranges of almost any Digital Multimeters (DMMs) without breaking the circuit under test. • Using KEW 8115 with KEW 1051/1052 (DMM) the display can be set for direct reading in A.
Category:
Discontinued products
MODEL Descriptions Remark Alternative 1007 Digital Multimeter 1009 1008 Digital Multimeter 1009 1010 Solar Pocket Tester Solar battery No 1015 Digital Multimeter 1018 1017 Digital Multimeter 1018 1020 Digital Multimeter Automatic mode switchingbetween AC and DC voltage measurements. No 1103 Analogue Multimeter 1110 1104 Analogue Multimeter with 1000V range and10A range 1109S 1106 Analogue Multimeter 1110 1108 Analogue Multimeter 1109S 1109 Analogue Multimeter 1109S 1601 Analogue Multimeter No 1700 Voltage Tester KT 170 1710 Voltage Tester KT 171 2002 Digital Clamp Meter 2002PA,2002R 2009A AC/DC Digital Clamp Meter 2009R 2037 AC/DC Digital Clamp Meter 2046R 2103 Analogue Clamp Meter No 2401 Analogue Leakage Clamp Meter Equivalent battery type: P625U No 2411 Analogue Leakage Clamp Meter Equivalent battery type: P625U No 2417 Leakage Clamp Meter No 2904 Analogue Clamp...
Category:
Impedance testers
Custom microprocessor controlled for highest accuracy and reliability. • 3 LEDs for checking correct wiring status. • 15mA LOOP measurement:LOOP impedance 2000Ω range measurement is carried out with low test current (15mA).The current will not cause tripping out involved RCD even the one with the lowest nominal differential current (30mA). • Direct reading of Prospective Short Circuit Current (PSC). • Safe voltage measurement function. • Large custom digital display readout on all models. • Measure low loop resistances(resolution of 0.01Ω) • Automatic lock-out if test resister overheats. • Large custom digital display readout . • Visual indication of reversed phase and neutral wiring at socket. • Designed to IP54 Rating • Complies with IEC 61557
Category:
Phase sequence indicators
• Phase Indicator with open phase checker • Phase indicator designed to check the presence of open phase and also the phase sequence by rotating disk and lamps. • Can check a wide range of 3-phase power source from 110V to 600V.