Sound level meters

Sound is a sequence of waves of pressure that propagates through compressible media such as air or water. (Sound can propagate through solids as well, but there are additional modes of propagation). Sound that is perceptible by humans has frequencies from about 20 Hz to 20,000 Hz. In air at standard temperature and pressure, the corresponding wavelengths of sound waves range from 17 m to 17 mm. During propagation, waves can be reflected, refracted, or attenuated by the medium.[2]

  • Filter

Conforms with all the essential health and safety standards & requirements set out by the European Directives IEC651 Type 2, ANSI 1.4 Type 2 and GB/T3785 compliant Multifunctional and with 30-130dB wide range and built-in calibration signal of 94dB at 1kHz (sinusoidal) Offers 4 measurement parameters Lp (sound level), Leq (equivalent continuous A sound),Lmax (maximum sound level), LN (percent of all readings over alarm value set)

Product Description - IEC 61672, Type II - 30~130dB. - Auto Ranging. - LO, MED, HI ranges.

- IEC 61672, Type II - USB Datalogger with 14,000 records. - Auto Ranging. - 30~130dB. - LO, MED, HI ranges.

- Fast, Slow, Impulse response time. - Frequency range: 31.5Hz ~8KHz. - Measurement range: 30dB~130dB. - Dynamic range:100dB. - A/C/Z frequency. - Storage up to 32,000 records. - USB interface. - AC and DC output. - Bargraph display

Measure % Noise Dose / Exposure Time / Sound Level Real time clock with calendar(1355) RS-232 interface(1355)

Specifications - Fast, Slow, Impulse, Peak response time. - Frequency range: 20Hz ~16KHz. - Measurement range: 30dB~130dB. Class 1   Integrating Sound Level Meter      Comply with IEC-61672-1 2002  Class1 Ideal for the assessment of   - Environmental noise. - Noise at workplaces. - Product noise    - Fast, Slow, Impulse, Peak response time. - Frequency range: 20Hz ~16KHz. - Measurement range: 30dB~130dB. - Dynamic range:100dB. - A/C/Z frequency. - Data stored up to 32,000 records,auto-mating   transfer to micro SD card. - DC & AC Output. - USB interface. - Bargraph display  SPECIFICATION: Display 3 1/2 digit backlit LCD display, maximum reading of 2000 Display refresh rate 1 time/ per second Applicable specifications - IEC 61672-1 : 2002 Class1   - ANSI S1.4 Type 1 - CNS NO.7129 Type 1        - JJG-188-2002 Class1 Microphone -/+1/2" pre-polarized condenser microphone build in preamplifier: -26 +/- 2dB (50mV/Pa), frequency range: 20 Hz~20 kHz, heat noise : <28 dB(A) Measurement...

- Display Range : 30-90dB ; 50-110dB ; 70-140dB. - Test Range : 41-86dB, 55-106dB and 75-125dB. - Frequency Weighting : A ; C ; Z. - Perform OSHA and IEC Noise accumulation surveys. - Six built-in standard dose measurement setups : OSHA, MSHA, DOD, ACGIH, ISO85, ISO90. - USB Data logger .