Clamp meters
Sub Categories
Analysis for Single Phase and Balanced 3 phase system True RMS Value (V and I) Active Power (K,KW,MW,GW) Apparent (VA,KVA,MVA) and Reactive Power (VAR,KVAR,MVAR) Power Factor (PF), Phase Angle( Φ ) Energy (WH,KWH,KVARH,PFH) Programmable PT(1 to 3000)Ratios Display of Overlapped Voltage and Current Waveform Maximum Demand (MD in W,KW,MW) with programmable Period Harmonic Analysis (V and I) to 50th Order Display of 25 Harmonics in one screen Optical Isolated RS-232C Interface Smart Datalogging to save Battery Datalogging of 32,64,128 or 256 points/cycles Analysis of Total Harmonic Distortion (%THD-F) Graphic Phasor Diagram Capture 128 Transient Events (Time+Cycles+Faults) with Programmable Threshold(%),also can be reviewed in LCD 50000 Records with Programmable Interval (1 to 6000 seconds) Real-time Output of Waveform, Power Parameters and Harmonics at Command Large Dot Matrix LCD Display with Backlight Power for Long-term Monitoring Built -in Calendar Clock for Data Logging General Specification: Conductor Size 55mm(approx.), 64*24mm(bus bar) Battery Type Two...
The clamp power analyser is a very economical solution for the analysis of single phase or balanced 3 phase systems with voltages to 600VAC and current to 2000 amps. The product uses the same SD card logging. Readings are logged from every 2 second to 7200 seconds as instantaneous values. It also captures 3 types of transient events with programmable threshold. The display is graphical dot matrix and has many graphic formats including waveform on voltage and current - phasor diagram and others. Measures ACV, ACA, KW, KVA, KVAR, PF Measures KWH, KVAH, KVARH, PFH Frequency, harmonics to 50th Type K thermocouple input 0.1 resolution to 199.9C then 1C to 1200C SD card logging Cables to 57mm 10amps to 2000amps autorange Record graphic displays to memory as .bmp files
232 is used in power system maintenance. Beside power measurement, it also provides the voltage, current measurement and continuality function. Features: 4 Digital Display. TRUE RMS. Autoranging. Auto Power Off. Peak Hold Function. Data Hold Function. Auto Zero.
Our leakage clamp has a very good resolution of 10uA. It is very useful for power system check and installation. With the measuring range up to 100A, it is also proper for indoor installation as a normal clamp meter so that the technician only have to bring one tester. Features: 4 Digital Display. 10uA Resolution. Autoranging. Auto Power Off. Max Hold Function. Data Hold Function. Auto Zero.
General use AC/DC Clamp meters. Can measure Frequency.
Analysis for Single Phase and Balanced 3 phase system True RMS Value (V and I) Active Power (K,KW,MW,GW) Apparent (VA,KVA,MVA) and Reactive Power (VAR,KVAR,MVAR) Power Factor (PF), Phase Angle( Φ ) Energy (WH,KWH,KVARH,PFH) Programmable PT(1 to 3000)Ratios Display of Overlapped Voltage and Current Waveform Maximum Demand (MD in W,KW,MW) with programmable Period Harmonic Analysis (V and I) to 50th Order Display of 25 Harmonics in one screen Optical Isolated RS-232C Interface Smart Datalogging to save Battery
Super High Resolution DC 1mA, AC 0.1mA One Touch Zero for DCA True RMS
223 is a high resolution AC/DC clamp meter. With resolution of 1mA and span of 100A, this tester is great for appliance installation or for car applications. Features: Analog Signal Output Function. Pocket Size. 4 digits Display. Peak Hold Function. Data Hold Function. 1mA Resolution. Touch Zero Function. Autoranging. Auto Power Off