You have 0 items in your cart.
Features:
Wide input voltage range and high power factor (P.F)
high efficiency and high power density
Constant voltage and constant current operation
Over voltage over current and over temperature protection
Low ripple and noise
Output on/off control
Self-test and software calibration
Labview driver
Standard interface : RS-232C
Optional interface : GPIB ( IEEE-488.2 )
Description:
The PSH-Series are single output from 360 to 1080W, programmable switching DC power supplies. OVP, OCP, and OTP protect the power supply and loads from unexpected conditions. Remote sensing adds an extra level of precision by compensating cable losses between loads. The bright LCD with simultaneous parameter outputs allows effortless operation. Self-test and software calibration features also reduce maintenance efforts. SCPI commands and LabVIEW driver access through the RS-232C or the optional GPIB interface allow remote control and ATE software development. Modular architecture, dedicated rear-panel output, and the 19 inch 4U rack mounting option ensure that the PSH-Series is optimized for large systems.
Specification:
| OUTPUT | ||||
| Voltage Rating / Output Capacity | 360W | 720W | 1080W | |
|
20V
|
18A(PSH-2018A)
|
X | X | |
|
36V
|
10A(PSH-3610A)
|
20A(PSH-3620A)
|
30A(PSH-3630A)
|
|
| REGULATION (CV) | ||||
| LOAD | ≦0.1% + 5mV | ≦0.1% + 5mV | ≦0.1% + 5mV | |
| Line | ≦0.05% + 5mV | ≦0.05% + 5mV | ≦0.05% + 5mV | |
| REGULATION (CC) | ||||
| Load | ≦0.2% + 5mA | ≦0.2% + 10mA | ≦0.2% + 15mA | |
| Line | ≦0.2% + 5mA | ≦0.2% + 10mA | ≦0.2% + 15mA | |
| RIPPLE & NOISE | ||||
| Voltage (mVrms) | ≦10mVrms | ≦10mVrms | ≦10mVrms | |
| Voltage (mVp-p) | ≦100mVp-p 20Hz~20MHz | ≦100mVp-p 20Hz~20MHz | ≦100mVp-p 20Hz~20MHz | |
| Current (mArms) | ≦0.2% | ≦0.2%+20mA | ≦0.2%+40mA | |
| RESOLUTION | ||||
|
Voltage
|
≦36V >36V |
10mV 20mV |
10mV 20mV |
10mV 20mV |
|
Current
|
10V 20V 36V 60V |
10mA 10mA 10mA 10mA |
20mA 10mA 10mA 10mA |
30mA 20mA 10mA 10mA |
| PROGRAM ACCURACY | ||||
| Voltage | ≦36V >36V |
≦0.05% + 25mV ≦0.05% + 50mV |
≦0.05% + 25mV ≦0.05% + 50mV |
≦0.05% + 25mV ≦0.05% + 50mV |
| Current | 10V 20V 36V 60V |
≦0.2% + 30mA ≦0.2% + 30mA ≦0.2% + 30mA ≦0.2% + 30mA |
≦0.2% + 60mA ≦0.2% + 30mA ≦0.2% + 30mA ≦0.2% + 30mA |
≦0.2% + 90mA ≦0.2% + 60mA ≦0.2% + 30mA ≦0.2% + 30mA |
| READBACK(Meter)RESOLUTION | ||||
| Voltage | Same as resolution | |||
| Current | Same as resolution | |||
| READBACK (Meter) ACCURACY | ||||
| Voltage | Same as program accuracy | |||
| Current | Same program accuracy | |||
| READBACK TEMP. COEFFICIENT | ||||
| Voltage(25 + 5°C ) | ≦100ppm/°C | |||
| RESPONSE(Rise/Fall)TIME | ||||
| Voltage Up (10%~90%) | ≦150mS(≦95% rating load) | |||
| Voltage Down (90%~10%) | ≦150mS(≧10% rating load) | |||
| RECOVERY TIME (50% Step Load Change From 25%~75%) | ||||
| CV Mode | ≦2mS | |||
| PROTECTION | ||||
| OVP/OCP/OTP | Yes | |||
| Rush Current | Yes | |||
| OUTPUT ON/OFF CONTROL | ||||
| Yes | ||||
| INTERFACE | ||||
| Standard: RS-232C; Optional: GPIB (IEEE-488.2)(GPIB and RS-232C are exclusive) | ||||
| POWER SOURCE | ||||
| AC 90V ~ 250V, 50/60Hz | ||||
| DIMENSIONS & WEIGHT | ||||
| 108(W) x 142(H) x 393(D)mm Approx. 3.3kg |
108(W) x 142(H) x 393(D)mm Approx. 6.2kg |
108(W) x 142(H) x 393(D)mm Approx. 9.3kg |
||
Accessories:
User Manual X 1, Power Cord X 1
Ordering information:
| Programmable Switching D.C. Power Supply | ||||
|
Output Watts (W)
|
Output Volts (V)
|
Output Amps (A)
|
Weight (kg)
|
|
|
PSH-2018A
|
360W
|
0~20V
|
0~18A
|
3.3kg
|
|
PSH-3610A
|
360W
|
0~36V
|
0~10A
|
3.3kg
|
|
PSH-3620A
|
720W
|
0~36V
|
0~20A
|
6.2kg
|
|
PSH-3630A
|
1080W
|
0~36V
|
0~30A
|
9.3kg
|
Downlod:
|
Marcom Tool
|
|||||||||||||||||||||||||||||||||||||||||||||||||||||||
|
Manual
|
|||||||||||||||||||||||||||||||||||||||||||||||||||||||
|
Software
|
