SEW-Taiwan
Various Instruments
Sub Categories
FEATURES ● Wide range for measurements up 40000 lux and 4000 fc.● 0.01 lux and 0.001 fc resolution for accurate low light level measurements.● Light sensor cover is included for preserving sensor life.● Auto off function.● Data hold and peak hold function.● Low battery indication.● Over range indication.● Auto-ranged.● Manual-ranged.● Calibration mode is provided.● 9V battery system.● Selection key for lux and fc.● The spectral sensitivity close to CIE photopic curve.● Ideal tool for workplace, clean-room and computer room light testing.● Video, photographic, office, classroom, and architectural uses. SPECIFICATIONS Measuring ranges 39.99 / 399.9 / 3999 / 39990 lux 3.999 / 39.99 / 399.9 / 3999fc Resolution 0.01 lux - 10 lux 0.001 fc - 1 fc Accuracy ±(3%rdg+5dgt) Calibrated to standard incandescent lamp, 2856°K. Display 4000 count LCD Photo sensor Silicon photodiode Operating / storage conditions 0°C - 40°C < 80 % R.H. -10°C - 50°C < 80 % R.H. Dimensions 194(L) x...
FEATURES ● The 188FFF is a Fuse and Fault Finder which comprises of two parts : The Receiver and the Transmitter.● The Transmitter, draws a current from the mains supply circuit to which it is connected to. The Signal● Current from the Tx is at about 10kHz. The Transmitter is powered by the mains and requires no batteries.● The 10kHz signal current generated by the Transmitter is then searched(sniffed) by the Receiver to detect the Fuse, Circuit Breaker or the faulty circuit.● The Receiver is a tuned circuit which has it's center frequency tuned to about 10kHz. The sensor is located in the tip of the Receiver.● The amplitude of the received signal is shown on a bar-graph type Leds.● The more Leds ON, the stronger the signal.● The Receiver uses one 9V battery. SPECIFICATIONS Receiver Tuner circuit mid frequency 10kHz Bar graph leds 9 Battery indicator led 1 On button 1 Off button 1 Buzzer 1 Auto-off(Min) approx 1 ...
FEATURES ● Determine the running cost your appliances.● Make informed decisions when purchasing appliances and equipment.● Reduce your electricity bill.● Measure Voltage, Current, Power, Volts, Amps, Power Factor, and Greenhouse Gas Emissions.● Calculate electrical expenses by day, week, month, and even an entire year. SPECIFICATIONS Item Range Units Accuracy PM-10 PM-15 AC Voltage 100-240 V rms ±1% AC Current 10 15 A rms ±1% Power 0-2500 0-3750 W ±1% Apparent Power 0-2500 0-3750 VA ±1% Power Factor 0.001-1 Watt /(Vrms* Arms) Frequency 45-65 Hz ±1% Cost 0-9999999 $ Energy 0-99999 kWh Gas 0-999999 kg Cost Setting 0-99.999 kWh,cents/kWh Gas Setting 0-9.999 kg/kWh Time...
FEATURES ● Large LCD : 68 × 34mm (2.677" × 1.338").● True measurement of speaker systems actural impedance at 1kHz.● Three test ranges allow testing of home theater and commercial sound systems.● Measures transformer impedances.● Battery operation.● Low battery indication.● Data hold function.● 0Ω adjustment. SPECIFICATIONS Measuring ranges 0-20Ω / 0-200Ω / 0-2kΩ Test frequency 1kHz Accuracy 20Ω:±2%rdg±2dgt or ±0.1Ω Which is greater 200Ω/2kΩ : ±2%rdg±2dgt Low battery indication “ “ Symbol appears on the display Data hold indication “ “ Symbol appears on the display Dimensions 175(L) × 85(W) × 75(D)mm Weight (battery included) Approx. 600g Power source 1.5V (AA) × 8 Safety standard EN 61010-1 CAT III 200V EN 61326-1
FEATURES ● x10 Model allows for more accurate measurements of low amperage devices.● Direct reading x1 mode.● 4mm Voltmeter input jacks.● Intergrated ground conductor.● 10 amp capacity. SPECIFICATIONS Input/Output line connector 3 prong U.S. standard Max. Voltage/Ampere rating 120Vac(±10%)/10Aac Operating Temperature & Relative Humidity 0℃~50℃ Max.80%R.H. Weight Approx. 110g Dimensions 145(L) x 55(W) x 35(D)mm
FEATURES ● 2000 counts.● DC Voltage measurement.● 4-wire resistance measurement.● Data hold function.● Low battery indication.● 9V DC power supply.● Measure battery types: Li-ion, Ni-Cd, Ni-MH● Simple operation.● Lead resistance and contact resistance eliminated. SPECIFICATIONS DC Voltage Range 2V 20V 100V Resolution 1mV 10mV 100mV Accuracy ±(1%rdg+1dgt) ±(1%rdg+1dgt) ±(1%rdg+1dgt) Resistance Range 200mΩ 2000mΩ 20Ω Resolution 0.1mΩ 1mΩ 10mΩ Accuracy ±(3%rdg+3dgt) ±(3%rdg+3dgt) ±(3%rdg+3 dgt) General Low battery indication " " sign appears on the display when the battery voltage drops below accurate operating level. Dimensions 192(L) × 88.6(W) × 45.2(D)mm Weight (battery included) Approx. 360g Power source 9V(6F22) × 1 Safety standard EN 61010-1 CAT I 100V EN...
FEATURES ● The RCB-1 is used to verify and proof any High Voltage Insulation Testers. It can be utilized to calibrate all High Voltage Insulation Testers very accurately Analogs or Digitals.● Some institutions and large industries requested their own calibrator too, therefore, SEW started manufacturing the RCB for special customers. SPECIFICATIONS Resistance ranges (Ω) 1M. 2M. 7M. 10M. 20M. 30M. 50M. 100M. 200M. 500M. 1G. 2G. 5G. 10G. 20G. 50G. 100G. 200G. 500G Resistance tolerances ±1%(F) Tolerance ± 25ppm/°C : 1MΩ. 2MΩ. 7MΩ. 10MΩ. 20MΩ. 30MΩ. 50MΩ. 100MΩ. 200MΩ. 500MΩ ± 100ppm/°C : 1GΩ. 2GΩ. ± 200ppm/°C : 5GΩ. 10GΩ. 20GΩ. 50GΩ. 100GΩ. ± 400ppm/°C : 200GΩ. 500GΩ ± 1000ppm/°C : 1TΩ Max. working voltage DC 10kV Operating temperature -30°C~75°C Power coefficient Below 3W Connecting terminals Binding Post : Resistance circuit and guard Dimensions 430(L) × 324(W) × 127(D)mm Weight Approx. 5200g...
FEATURES ● The 880 AT is a simplified Version of an appliance tester which use low voltage and low current to perform it's checks.● Application Example The appliance is plugged into the mini appliance checker, then the probe make contact with the protective conductor.● Other appliance checking Washing Machine Toaster Iron Dish Washer Stove SPECIFICATIONS ELECTRICAL Resistance Ranges The L-E led will lit when the resistance between Line to Earth is lower than 1MΩ ±5% . The N-E led will lit when the resistance between Neutral to Earth is lower than 1MΩ±5% The EARTH BOND led will lit when the resistance between the EARTH to the Probe is higher than 10Ω±5% . Test Current Line to Earth test current is 9uA maximum. Neutral to Earth test current is 9uA maximum. Earth to Probe test current is 2.3mA maximum. Maximum...