You have 0 items in your cart.
Products
Sub Categories
Category:
Fruit Hardness Tester (Sclerometer)
I.Introduction: Fruit Sclerometer can measure the hardness of apples,pears,strawberries and grapes,etc.It is a suitable instrument for fruit company,fruit farm,fruit research institutions to test the ripeness of fruits,with compact size,low weight and ocular reading.It is suitable to use on the acene and also can be applied with its matched test stands to improve the accuracy. II.Parameters: Capacity: 2-15 Pressure Diameter: 3.5mm Accuracy: +/-0.1 Pressure Depth: 10mm Dimension: 140*60*30mm N.W.: 0.3kg
Category:
H.V. Multifuntion Phasing Sticks
● No user’s assembled parts.● Dual color-coded scale (%, Vac).● Neon indicator when >1200Vac.● Lightweight, robust & compact.● Carry case included.● Compare between phases.● Measure and test phase to earth.● High quality fiberglass wound rod.● Self powered operation. No battery required.● DC version available.● Measure phase to phase.● Hi immunity to interference fields.● Suitable for indoor and outdoor use.● Current is limited to ±1 milli-ampere.● Grounded or ungrounded systems.● Meets IEC 61481 (excludes PC44K).
FEATURES ● Microprocessor-controlled.● Automatic voltmeter AC/DC at Start/Reset.● Auto range● Auto off.● Battery test.● Battery test at Switch ON/Reset.● Safety voltmeter before each test.● Auto discharge on all test and all ranges.● Leads Auto-null key.● Test Auto-stop.● Smart hold & stop on voltmeter ac/dc.● Ener-Save feature to extend battery life.● Continuity short circuit current > 220mA.● Continuity open circuit voltage of 5Vdc.● Nominal voltage @ 1mA on all insulation ranges.● Accept 8 rechargeable batteries or Alkaline of normal.● BS 16 edition. SPECIFICATIONS Insulation Resistance Test voltage 250V / 500V / 1000V Measuring ranges 0.2M~2GΩ / 0.2M~4GΩ / 0.2M~8GΩ Continuity Range 0.01Ω~1999Ω Voltmeter AC V 0-700V DC V 0-950V PI Function ˇ DAR Function ˇ
Electromagnetic Conductivity Transmitter MDM-135A （2-wire） Electromagnetic conductivity analyzer for field installation in a compact and rigid aluminum enclosure Made for accurate measurements for high conductivity corrosive solutions (such as strong acid/alkali) Alterable output range Meas. range Minimum : 0 - 2 mS/cm Maximum : 0 - 2000 mS/cm
Resistivity Analyzer for Ultra-Pure Water AQM-100A Compact DIN 96 size Best suited for water quality control in ultra-pure water production lines Two detectors connectable Meas. range 0.00 - 20.00 MΩ・cm
Category:
Particulate Monitor
PM2.5 Monitor FPM-377 Environment Ministry (JAPAN) Approval Beta ray attenuation method (mass concentration) Heater type dehumidifier VSC cyclone (USEPA approval) Outdoor type and indoor type available Meas. range 0 - 500, 0 - 1000, 0 - 5000 μg/m3
Category:
CROSS HATCH CUTTER
Specifications H cross hatch cutter is applicable to determine the adhesion of organic coatings by cross-hatching. This instrument is designed for assessing the resistance of paint or related coatings to separation from substrates when a right-angle lattice oattern is cut into the coating, penetrating through to the substrate. The Cross Hatch Cutters conform with the requirements of :BS 3900 E6;BS/EN ISO 2409;ASTM D 3359;GB/T 9286, ,it is economy. Main Technical Parameters: 1.Six working side blades:When the blade edge is not sharp enough, users can loosen the boat type nut and top thrust screw to change blade. 2.Multi-cutting blades spacing:1mm/2mm/3mm 3.The number of square:25squares/100squares
Category:
Precision Current Shunt Meter
Features - 6 1/2 Digit measurement resolution- Dual measurement for Voltage and Current- AC&DC Current measurement range:30mA/300mA/3A/30A/300A(Max)AC Voltage measurement range:200mV/2V/20V/200V/600V(Max)DC Voltage measurement range:200mV/2V/20V/200V/1000V(Max)- Auto zero circuit- Standard Interfaces: USB, GPIB