You have 0 items in your cart.
LCR | Resistance | Super Megaohm | Calibrators
Sub Categories
Category:
LCR | Resistance | Battery Testers
3 mΩ to 3 Ω/60V Handheld Battery Tester for Diagnosing and Managing UPS Batteries Hioki portable battery testers support the maintenance of UPS and storage batteries critical to the life support of all businesses. The 3554 sets the standard for assessing the deterioration and remaining life of lead-acid batteries by giving a complete diagnosis via battery resistance testing. The thresholds for determining the pass/fail condition of a battery depends on the specifications and standards of the battery manufacturer, battery type, capacity, etc. It is important and necessary to always conduct battery testing against the internal resistance and terminal voltage of a new or reference battery. In some cases, it may be difficult to determine the deterioration state of sealed lead acid batteries which demonstrates smaller changes in internal resistance than traditional open type (liquid) lead-acid or alkaline batteries.
Category:
LCR | Resistance | Battery Testers
300 mΩ to 30 Ω/30V Portable Battery Tester for Testing Compact Storage Batteries for Mobile Devices Hioki portable battery testers support the maintenance of UPS and storage batteries critical to the life support of all businesses. The 3551 tests high-capacity alkali and lead-acid storage batteries used in mobile devices, up to 30V. The 3555 cannot make PASS/FAIL judgments for lithium-ion batteries due to the extremely small magnitude of the changes in their internal resistance. For applications involving measurement of batteries with low internal resistance, for example lead acid batteries, use the Battery HiTester 3554.
Category:
LCR | Resistance | Battery Testers
300 mΩ to 3Ω/20V DC Battery Resistance Testers for High-Speed Production Line Testing of Small Battery Packs for Mobile Devices Hioki benchtop battery testers support simultaneous high-speed measurement of internal resistance and battery voltage for the ever-expanding production lines of increasingly larger lithium-ion low resistance batteries, and other battery packs for high voltage applications. The 3561 is a high-speed device ideal for the production line testing of small secondary batteries. 3561: Basic model 3561-01: with GP-IB • Measurement leads are not included. Purchase the appropriate lead option for your application separately. • The male (system side) of the EXT I/O connector is also available. Please inquire with your HIOKI distributor.
Category:
LCR | Resistance | Battery Testers
3 mΩ to 3000 Ω/60V DC Battery Resistance Testers for Production Line Testing of Battery Packs and Modules Hioki benchtop battery testers support simultaneous high-speed measurement of internal resistance and battery voltage for the ever-expanding production lines of increasingly larger lithium-ion low resistance batteries, and other battery packs for high voltage applications. The BT3562 series can measure the voltage and resistance of coin-size to large-cell batteries up to 60V almost simultaneously due to their quick response time. BT3562: Basic model BT3562-01: with GP-IB • Measurement leads are not included. Purchase the appropriate lead option for your application separately. • The male (system side) of the EXT I/O connector is also available. Please inquire with your Hioki distributor.
Category:
LCR | Resistance | Battery Testers
3 mΩ to 3000 Ω/300V DC Battery Resistance Testers for Production Line Testing of High Voltage Battery Packs and Modules Hioki benchtop battery testers support simultaneous high-speed measurement of internal resistance and battery voltage for the ever-expanding production lines of increasingly larger lithium-ion low resistance batteries, and other battery packs for high voltage applications. The BT3563 series can measure the voltage and resistance of battery modules, high voltage battery packs, fuel cell stacks and other large batteries up to 300V. BT3563: Basic model BT3563-01: with GP-IB • Measurement leads are not included. Purchase the appropriate lead option for your application separately. • The male (system side) of the EXT I/O connector is also available. Please inquire with your Hioki distributor.
Category:
LCR | Resistance | Battery Testers
Dual-band 1kHz/1MHz Capacitance Tester for High Speed Inspection of Multi-Layer Ceramic Capacitors (MLCC) on Taping Machines Hioki LCR and Impedance Analyzers range from 4Hz to 120MHz devices to suit a wide range of applications in the testing of electronic components. The 3504 series are dual-band capacitance testers suited for large-capacitance MLCC inspections using a constant voltage. 3504-40: Basic model 3504-50: Adds GP-IB and BIN function 3504-60: Adds GP-IB, BIN function, and Contact Check This product is not supplied with measurement probes or test fixtures. Please select and purchase the measurement probe or test fixture options appropriate for your application separately. For an RS-232C connection: A crossover cable for interconnection can be used. You can use the RS-232C CABLE 9637 without hardware flow control.
Category:
LCR | Resistance | Battery Testers
Dual-band 1kHz/1MHz Capacitance Tester for High Speed Testing of Ceramic Capacitors on Production Lines Hioki LCR and Impedance Analyzers range from 4Hz to 120MHz devices to suit a wide range of applications in the testing of electronic components. The 3506-10 is a dual-band capacitance tester designed to be integrated with automatic taping machines and sorters for production of MLCC (multi-layer ceramic capacitors). This product is not supplied with measurement probes or test fixtures. Please select and purchase the measurement probe or test fixture options appropriate for your application separately. For an RS-232C connection: A crossover cable for interconnection can be used. You can use the RS-232C cable 9637 without hardware flow control.
Category:
LCR | Resistance | Battery Testers
Wide band 1mHz to 200kHz Chemical Impedance Analyzer for Testing Electrochemical Components and Materials, Batteries, and EDLC Hioki LCR and Impedance Analyzers range from 4Hz to 120MHz devices to suit a wide range of applications in the testing of electronic components. The IM3590 is an advanced component tester especially suited to electrochemical impedance measurements and includes a variety of graphing functions that are needed for battery and chemical material testing. This product is not supplied with measurement probes or test fixtures. Please select and purchase the measurement probe or test fixture options appropriate for your application separately. For an RS-232C connection: A crossover cable for interconnection can be used. You can use the RS-232C Cable 9637 without hardware flow control.