You have 0 items in your cart.
GW Instek
Sub Categories
Stemming from the design and manufacture demands of electronic industries, GW Instek offers diverse...
In addition to provid complete electronic test and measurement instruments, GW Instek...
Category:
LCR Meters
Features: * 20,000/2,000 Counts Dual Display* Test Frequency : 100/120Hz/1/10/100kHz depends on model* Auto LCR Mode for DUT Measuring* 0.2% Basic Accuracy* Measurement Parameter : L,C,R,D,Q,ESR,θ,DCR* Parallel/Series Testing Mode* Sorting Mode for Quality Control* 2Wire or 5Wire Measurement Available* Data Hold and Zero Mode Supported* Max and Min (LCR-916 only)* Auto Range, Auto Backlit* Low Battery Indication* Auto Power off* Data Collection or AC power operation (Optional)
Category:
Safety Testers
Features: ※ 500VA AC Test Capacity※ 240x64 Ice Blue Dot matrix LCD※ Sweep Function for DUT characteristic analysis※ Insulation resistance measurement up to 50GΩ(GPT-9903/9904)※ Manual/Auto Mode※ Function Key for quick selecation※ High intensity flash for caution & Status indication※ Safety INTERLOCK function※ Zero Crossing Turn-on Operation※ Controllable Ramp-up Time※ True RMS Current Measurement ※ High resolution: 1uA for measuring current, 2V for setting voltage※ PWM amplifier to enhance the power efficiency and reliable testing ※ Max. 100 memory block for test condition (step) setting. And each step can be named individually.※ Remote terminal on the front panel for “start” and “stop” control※ Rear panel output available※ Interface : RS-232C, USB device, Signal I/O and GPIB (optional)
Category:
Safety Testers
Features: ※ 200VA AC Test Capacity※ 240x64 Ice Blue Dot matrix LCD※ Manual/Auto Mode※ Function Key for quick selecting※ High intensity flash for Caution & Status indication※ Safety INTERLOCK function※ Zero Crossing Turn-on Operation※ Controllable Ramp-up Time※ True RMS Current Measurement ※ High resolution: 1uA for measuring current, 2V for setting voltage※ PWM amplifier to enhance the power efficiency and reliable testing ※ Max. 100 memory block for test condition (step) setting. And each step can be named individually.※ Remote terminal on the front panel for “start” and “stop” control※ Interface : RS-232C, USB device, Signal I/O and GPIB (optional)
Category:
Safety Testers
Features: ※ 100VA AC Test Capacity※ 240x48 Ice Blue Dot matrix LCD※ Auto W-I or I-W Mode※ ARC Detection※ True RMS Current Measurement※ Zero Crossing Turn-on Operation※ Safety INTERLOCK function※ PWM amplifier to enhance the power efficiency and reliable testing ※ Automatically Switching Input Source for Universal Input Voltage※ Interface : Remote terminal and Signal I/O
Category:
Safety Testers
Features: ※ Touch Panel with Color LCD Display※ 9 Different Measurement Network to Simulate the Resistance of Human Body※ 8 Different Types of Leakage current for Medical & General Electrical Equipment※ Various Leakage Current Measuring Mode： DC/AC/AC+DC/AC Peak ※ Upper & Lower Limitation for PASS/FAIL Judgment※ Meter Mode with SELV/CONV Function※ 50 Preset Test Conditions Conform to IEC 60990; 30 Sets Memories for Customer Defined※ Various Standard Interfaces： RS232/GPIB/USB Host & Device/EXT I/O
Category:
Other Application Instruments
Features: ※ 30000 Counts Display ※ High Accuracy 0.05% ※ Hi/Lo Comparator and Limit Percent Setting ※ Measurement of REL, Actual and % Value ※ Continuous or Triggered Measurement Mode ※ Temperature Compensation and Measurement ※ Four-Terminal Measurement Technique ※ Auto-Recall Last Setting After Power OFF and ON Again ※ Alarm Setting for PASS/FAIL ※ Scan, Handler Interface(Standard) ※ Manual or Autoranging ※ RS-232C+GPIB (Option)
Category:
Other Application Instruments
Features: ※ 3 1/2 Digits 0.5" LED Display※ Measures from 20mΩ ~ 20kΩ in 7 Ranges ※ 1A High Test Current ※ High Resolution 10uΩ ※ Hi/Lo Comparator Indicator and Buzz Alarma
Category:
Other Application Instruments
Features: ※ Loop Test ※ Auto-Search ※ Seif-Diagnosis ※ Over-Load Protection ※ Measures 1800 Kinds of Device ※ 54/74 Series TTL ※ 4000 and 4500 Series CMOS ※ Test Socket: 28 Pin